FC700 is a half-dome multi-functional facial capture camera developed by ZKTeco. It is seamlessly compatible with ZKTeco's BioServer facial recognition server (BioServer 2 & BioServer Pro 2) through the communication protocol developed by ZKTeco, and enables the remote facial recognition for a large number of people. FC700 can compare faces when connected to BioServer and report the results of captured and compared faces to the Time & Attendance system. FC700 has a high performance artificial intelligence algorithm embedded inside, which has the functions of face detection and facial feature extraction. These half-dome series cameras are mostly recommended to be installed in areas such as office areas, corridors, elevators and others small and fixed indoor monitoring sites, etc.
FC700 is equipped with 2MP star CMOS sensor, which helps to generate excellent and smooth video streaming and can perform facial recognition in background. The facial capture camera is backed by the superior algorithm which efficiently combines and fully utilizes computing power of its special chip, and achieves a leading level in the capture
effectiveness and practicability. The product takes the facial video surveillance to a higher level and can be compatible with many application scenarios
Camera | |
Image sensor | 1/2.8" 2-megapixel progressive scanning CMOS |
Effective image size | 1920*1080 |
Minimum illumination | 0.002LUX@F1.4 |
Day & Night | Automatic/color/black-and-white (ICR infrared cut-off filter) |
Wide dynamic range | 106dB |
White Balance | Automatic / manual |
Strong light suppression | Supported |
Fog penetration | Automatic / manual / close |
Digital noise reduction | Supports Intelligent Adaptive 2D/3D |
Specifications | |
Power supply | DC12V±20% |
Power | 4W |
Working temperature / humidity | 0℃ to 45℃; 5% to 95%(non-condensing) |
Waterproof rating | IP67 |
Lightning protection rating | 6kV lightning protection and surge prevention |
Weight | 0.41kg |
Size | Φ106.6*107*102mm |
Lens & fill light | |
Focus | 8mm/12mm |
Maximum Aperture | F2.4 |
Intelligent analysis | |
Anomaly detection | Face detection, video occlusion, motion detection, network disconnection, IP address conflict |
Interface | |
Internet | 1 RJ45 Gigabit Ethernet port self adaptive (10Mbps/100Mbps) |
Audio | 1 channel audio input and output |
Functions | |
Video compression format | H.265/H.264/MJPEG |
Coding type | H.265: MP, H.264: HP/MP/LP |
Maximum resolution | 1920*1080 (1080P) |
Video coding frame rate | Supports output of three bit-streams simultaneously: 50Hz: 25fps (1920*1080, 1280*720, 704*576) 60Hz: 30fps (1920*1080, 1280*720, 704*576) |
Multi-stream | Supports three bit-stream technology, dual HD, and simultaneous 10-way access. |
Protocol | ONVIF, GB/T28181 |
Network protocol | TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, RTP,RTSP, RTCP, NTP, QoS, IPv6, PPPOE |
On-screen display (OSD) | Overlay time, place, week, device number information and 6 letters custom Up to 8 regions are supported, and the overlay position can be set. Vector and dot matrix font library are supported |
Alarm linkage | Alarm source: Mobile detection alarm/Occlusion alarm/Switch input/Intelligent analysis alarm Linkage target: Switch output/Preset position/Cruise trajectory/Scan/Mail send/Pre-alarm preview |
Facial Video Surveillance | |
Face detection and capture | Supports dynamic face detection, tracking, optimization, output optimal facial capture. Simultaneous detection of 30 persons |
Face area exposure | Real-time adjustment of exposure parameters according to ambient light conditions to optimize facial capture quality. |